专业提供英国阻燃测试、法国阻燃测试、德国阻燃测试、欧盟阻燃测试、美国阻燃测试、意大利阻燃测试、船舶阻燃测试、国标阻燃测试、飞机阻燃测试

联系我们

电话:400-603-6575
          025-86583475
邮箱:info@fire-test.com

地址:江苏省南京市建邺区江东中路              118号德盈大厦16F

相关测试

测试标准

首页    其他测试及认证    澳标AS/NZS 4859.1-2018玻璃棉岩棉澳洲认证/R值测试

澳标AS/NZS 4859.1-2018玻璃棉岩棉澳洲认证/R值测试

玻璃棉岩棉等保温材料出口澳大利亚需满足AS/NZS 4859.1的标准要求,产品经过测试合格并经过严格的工厂评估后可颁发认证证书STANDARDMARK认证,南京睿督公司已澳洲NATA资质实验室合作十年多年,专业提供NATA资质的AS/NZS 4859.1(AS 4859.1)澳标的检测认证,咨询电话:025-8658 3475。

AS/NZS 4859.1:2018-Materials for the thermal insulation of buildings - General criteria and technical provisions
AS/NZS 4859.1:2018-建筑物隔热材料,一般标准和技术条款(玻璃棉、岩棉等保温材料)

AS/NZS 4859.1主要关注如下方面的测试项目
热阻、防火等级、重量、密度、尺寸等方面测试
thermal resistance, density, dimension, reaction to fire

Testing in accordance with AS/NZS 4859.1:2018 Thermal Insulation Materials for Buildings - General Criteria and Technical Provisions.
AS/NZS 4859.1 was significantly amended in 2018. The emphasis on the amendment was to include a wider range of insulating materials bringing rigid foam products into the standard. These new inclusions now incorporate the following:
(a) Rigid cellular polyurethane (RC/PUR) - AS 1366.1;
(b) Rigid cellular polyisocyanurate (RC/PIR) - AS 1366.2;
(c) Rigid cellular polystyrene Moulded (RC/PS-M) - AS 1366.3;
(d) Rigid cellular polystyrene Extruded (RC/PS-E) - AS 1366.4; and
(e) Urea-formaldehyde foam thermal insulationIn situ set foam - AS 4073.
The scope of this Standard does not cover requirements for fire performance

AS/NZS 4859.1参考标准
AS 1134 Wool—Determination of wool base and vegetable matter base of core samples
of raw wool
AS 1595 Cold-rolled unalloyed, steel sheet and strip
AS 2001 Methods of test for textiles
AS 2001.6.1 Method 6.1: Miscellaneous tests—Determination of the resistance of textiles to certain insect pests
AS 2001.7 Method 7: Quantitative analysis of fibre mixtures
AS 4200 Pliable building membranes and underlays
AS 4200.2 Part 2: Installation
AS/NZS 4200 Pliable building membranes and underlays
AS/NZS 4200.1 Part 1: Materials
AS/NZS 4201 Pliable building membranes and underlays—Methods of test
AS/NZS 4201.1 Method 1: Resistance to dry delamination

ISO 8301 Thermal insulation—Determination of steady-state thermal resistance and
related properties; heat flow meter apparatus
ISO 8302 Thermal insulation—Determination of steady-state thermal resistance and
related properties; guarded hot plate apparatus
ISO 8990 Thermal insulation—Determination of steady-state thermal transmission
properties—calibrated and guarded hot box

ASTM C167 Test methods for thickness and density of blanket or batt thermal insulations
ASTM C177 Test method for steady-state heat flux measurements and thermal transmission
properties by means of the guarded-hot-plate apparatus
ASTM C335 Standard test method for steady-state heat transfer properties of horizontal
pipe insulation
ASTM C518 Test method for steady-state heat flux measurements and thermal transmission
properties by means of the heat flow meter apparatus
ASTM C687 Practice for the determination of thermal resistance of loose fill building
insulations
ASTM C739 Standard Specification for cellulosic fibre (wood-base) loose-fill thermal
insulation
ASTM C1363 Standard test method for the thermal performance of building assemblies by
means of hot box apparatus
ASTM C1667 Standard test method for using heat flow meter apparatus to measure
center-of-panel thermal transmission properties of vacuum insulated panels

EN 12667 Thermal performance of building materials and products—Determination of
thermal resistance by means of guarded hot plate and heat flow meter
methods—Products of high and medium thermal resistance
EN 12939 Thermal performance of building materials and products—Determination of
thermal resistance by means of guarded hot plate and heat flow meter
methods—Thick products of high and medium thermal resistance
EN 13164:2012+A1:2015 Thermal insulation products for buildings—Factory made extruded
polystyrene foam (XPS) products—Specification
EN 13165:2012+A1:2016 Thermal insulation products for buildings—Factory made rigid polyurethane
foam (PU) products—Specification
EN 13166:2012+A1:2016 Thermal insulation products for buildings—Factory made phenolic foam (PF)
products—Specification

南京睿督| 防火阻燃检测  https://www.fire-test.com/newsinfo/4260230.html 
澳洲NATA资质-澳大利亚NATA认证 https://www.fire-test.com/newsinfo/5507425.html 

更多关于澳洲NATA资质AS/NZS 4859.1玻璃棉岩棉等保温材料澳大利亚认证,请咨询南京睿督公司
南京睿督公司咨询电话:400-603-6575   025-8658 3475
网址:www.fire-test.com   www.fire-test.cn 
邮箱:info@fire-test.com 
...

 

 

 

测试咨询

验证码