专业提供英国阻燃测试、法国阻燃测试、德国阻燃测试、欧盟阻燃测试、美国阻燃测试、意大利阻燃测试、船舶阻燃测试、国标阻燃测试、飞机阻燃测试

联系我们

电话:400-603-6575
          025-86583475
邮箱:info@fire-test.com

地址:江苏省南京市建邺区江东中路              118号德盈大厦16F

相关测试

测试标准

首页    常见问题    ASTM C518稳态热传导性能测试/导热系数检测

ASTM C518稳态热传导性能测试/导热系数检测

标准:ASTM C518–用热流量计装置测定稳态热传递特性的标准试验方法

范围本测试适用于各种材料。

适用产品:保温材料、建筑材料、窗户材料

测试程序:本测试使用热流量计装置(HFM)。热流量计由一块冷板和一块热板组成,热板上装有热通量传感器,用于测量热流。待测量的材料被放置在两个板之间,这两个板被控制到不同的温度,以产生从热板到冷板的热流,该热流由传感器测量。该装置针对已知导热率的材料进行校准,可用于测量厚度和导电率范围较广的扁平材料。测试通常在35oF至110oF的平均温度下进行,最常见的是75oF。通常使用40oF–50oF的温差。

最终结果:确定了热导率(k值)和热阻(R值)。这些值可用于确定材料的能量损失。该测试可用于满足绝缘材料的R值规定,如美国联邦贸易委员会的“R值规则”(10 CFR 460)。

特别注意:该方法通常可以用作ASTM C177的替代品,ASTM C177使用一种称为防护热板装置(GHP)的不同装置测定相同的性能。

Standard: ASTM C518 – Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

Scope: This test is used on a wide range of materials.

Applicable Products: Insulation, construction materials, window materials

Test Procedure: This test uses a Heat Flow Meter Apparatus (HFM). The Heat Flow Meter consists of a cold plate and a hot plate which incorporate heat flux transducers for measuring heat flow. The material to be measured is placed between the two plates which are controlled to different temperatures to create a heat flow from hot to cold plate, which is measured by the transducers. The device is calibrated against materials of known thermal conductivity and can be used to measure flat materials in a wide range of thickness and conductivity. Tests are commonly performed with a mean temperature between 35oF and 110oF, with the most common being 75oF. A temperature difference of 40oF – 50oF is commonly used.

End Result: The thermal conductivity (k-Value) and thermal resistance (R-Value) are determined. These values can be used to determine energy losses through a material. This test can be used to satisfy R-Value regulations for insulation materials, such as the US Federal Trade Commission’s “R-Value Rule” (10 CFR 460).

Special Notes: This method can often be used as an alternative to ASTM C177, which determines the same properties using a different device known as a Guarded Hot Plate Apparatus (GHP).

更多关于ASTM C518稳态热传导性能测试/导热系数检测,请咨询南京睿督公司
南京睿督公司咨询电话:400-603-6575   025-8658 3475
网址:www.fire-test.cn   www.fire-test.com  
邮箱:info@fire-test.com

……

测试咨询

验证码